Low Intensity Aviation Obstruction Light

Specifications

Intensity >40 candela.

Power Consumption < 5 W.

Optical lens arrangement to provide 360º illumination by high intensity red LEDs.

Casing made from Pressure die casting of Aluminium Alloy LM-6.

UV stabilized polycarbonate lens to protect the LED's.

Input voltage 80V-280V AC or 20V-60V DC.

Inbuilt on/off Photocell.

LEVEL OF PROTECTION: IP-65.

OPERATING TEMPERATURE : -10°C to +60°C.

OPERATING FREQUENCY: >100 KHz.

Conforming to ICAO Specification / FAA standards.

Radio Supression: Conforming to IEC 61000 - 6 - 4 2001/BS 800.

WARRANTY: 2 Years.

Control Panel for Aviation Light

Operates on 24V-48V DC or 80V-280V AC.

Special ABS Box.

Controller: To be kept inside shelter/enclosure.

IP 55 protected.

Water proof, dust proof, all cable entry point sealed.

Photo Sensor : Installed outside the enclosure and exposed to direct SUNLIGHT in order to control.
DAY/NIGHT Operations.

Flashing circuit, if required.

In Single AOL

In the night time if the intensity of the light falls down to more than 50% due to failure of LED's then there will be an audio visual failure alarm appear in the control box through potential free contact.

In Twin AOL

In twin AOL in case one light fail the other one will come on automatically & it will give an alarm at the base station through potentional free contacts.

Cables

Type of cable	-	4 core copper cable.
Weather proof	-	YES.
Manufacturer	-	PLAZA, FINOLEX, HAVELLS.
Thickness of Insulation	-	2.5sq mm.
Overall diameter of cable	-	10mm.

Please add .1 for ordering Metal top model after light code.