Instapower offers quality street lighting system based on LED technology and solar energy. It manufactures solar street lights and LED street lights. In these LED street lights, the light source is Light Emitting Diode and light output is white color, peak intensity 58 lux in model 1 and 78 lux in model 2 when measured from a height of 10 ft and illuminated over an area of at least 70 sq. ft.

Our street lighting system utilizes high quality LEDs imported from Agilent (USA), Nichia (Japan). The average duty cycle is dusk to dawn and autonomy is 4 days.

The light source is housed in a water resistant assembly and multiple LEDs can be used. The light output from the light source is kept constant. There is no linear variation with changes in the input battery voltage, i.e. 10.5 V DC-13.5 V DC

SMF battery is used, which has a life of 2-3 years. 75 % of the rated capacity of the battery should be between fully charged & load cut off conditions.

We ensure that the total electronic efficiency should be at least 85 %.

We ensure that the idle current consumption should not be more than 1 mA.

Necessary lengths of wires/cables and fuses provided.

The PV module will be used to sense the ambient light level for switching ON and OFF the lamp.

The PV module(s) contain crystalline silicon solar cells.

The PV Module voltage = 12VDC

The terminal box on the module has the provision for opening for replacing the cable

A strip containing the following details is laminated inside the module so as to be clearly visible from the front side.

Adequate protection incorporated under no load conditions, e.g. when the lamp is removed and the system is switched ON.

The system has protection against battery overcharge and deep discharge conditions.

LEDs are protected using a special patent applied technology.(LPM Technology)

We ensure that the fuses are provided to protect against short circuit conditions.

A blocking diode, is provided as part of the electronic protection to prevent reverse flow of current through the PV module, in case such a diode is not provided with the solar module.

Protection against open circuit, accidental short circuit and reverse polarity provided.

A metallic frame structure (with corrosion resistance paint) to be fixed on the pole to hold the SPV module. The frame structure have provision to adjust its angle of inclination to the horizontal between 0 and 45, so that the module can be oriented at the specified tilt angle.

A vented, acid proof and corrosion resistant painted metallic box for outdoor use is provided for housing the battery.

The pole is made of mild steel pipe with a height of 4 metres above the ground level, after grouting and final installation. The pole has the provision to hold the weather proof lamp housing. It is painted with a corrosion resistant paint.

TRAFFIC LIGHTS

Instapower has established itself as a renowned manufacturer & supplier of traffic lighting products in the global market. The traffic lighting products include Solar traffic lights, road traffic lights, LED traffic signal lights and road traffic light blinkers. Our technical know-how and expertise has enabled us to produce superior quality traffic lighting products & services pertaining to our domain.

These devices use 90 percent less energy and have serving life 10 times longer than incandescent lamps. Our comprehensive offering ensures compliance with the advanced LED traffic signal module specifications including the VTCSH - circular signal supplement; VTCSH - Part 3: LED vehicle arrow traffic signal modules and PTCSI - Part2: LED pedestrian traffic signal modules, energy star and many other state and municipal DOT specifications. These are available in red, yellow and green colors and are designed using the latest technology.

ADVANTAGES

• Minimum maintenance required.
  
• Low power consumption.
  
• Compatible with standard signal heads.
  
• Available with commonly used symbols.
  
• Optimal visibility. Even distribution of luminosity.
  
• High intensity light.