Xenon High Intensity Aviation Light

High reliability with long lamp life, low cost of ownership and low power consumption.
Simple internal design with only two main circuit boards for easy maintenance.
“Safe plug” lamp holder for easy lamp replacement.
Uses Insta special technology for the ignition of xenon lamps, control for long lamp life
and very low UV and ozone emission.
Internal photocells for automatic day/twilight/night intensity control.
Insta cable wiring system configuration combines power and control wires into a single protected cable.
Easy to install with integral mounting frame and lifting eye.
Level indicators provided to help with correct installation

STANDARDS

Standard: ICAO Annex 14 Volume 1, 4th edition - July 2004, Chapter 6 high Intensity type A & B obstacle light
Certified to: FAA AC150-5345/43E Type L856 & L857 obstacle light
Approved by: STNA of France (ICAO high intensity type A)

OPTICAL CHARACTERISTICS

40 or 60 flashes per minute (factory set as per table).
Horizontal beam pattern 120°, use 3 lights per level for 360° marking.
High accuracy vertical beam profile

ELECTRICAL CHARACTERISTICS

120-240 VAC (±10 %), 50-60 Hz.
Power consumption <150 W average continuous over typical 24 hour period.
Safety switch to disconnect power and discharge capacitors when unit opened .
Internal and external high voltage warning LED's .Light “fail” remote monitoring
Output. Failure indication LED.
Supplied with an Insta™ combined power and data connection cable.
EMC type cable gland.
Class D over voltage protection

PHYSICAL CHARACTERISTICS

Stainless steel 316 body.
Integral adjustable tilt angle mounting bracket.
IP66 degree of ingress protection (by design).
Operating temperature range -55 to +55°C (-67 to +130° F).
Size: 480mm X 335mm X 320mm
Size with mounting frame 460 x 650 x 303 mm (18 x 25½ x 12 ”).
Mounting holes at 420mm X 335mm X 12mm.
Weight (excluding packaging) 35 kg (77¼ lb).
Shipping dimensions: 800 x 600 x 500 mm (31½ x 23½ x 19¾ ”) 0-43 kg (94¾ lb)